Yaesu FT-991A Data Mode Setup for WSJT-x and JS8CALL
How to configure your Yaesu FT-991A
Data Mode Setup for WSJT-x and JS8CALL
You first will want to install a PC Timing Syc software. Data messages sent over the air work best when stations are in sync and within 0.1 DT Sec of each other. THe link below is an excellent piece of software to help your digital applications stay in clock sync http://www.timesynctool.com/
-
MENU/SETUP Button selections and settings
| MENU NBR | MANU NAME | SETTING |
| 031 | CAT RATE | 9600 (match pc serial port rate) |
| 032 | CAT TOT | 100msec |
| 033 | CAT RTS | DISABLE |
| 062 | DATA MODE | OTHERS |
| 064 | OTHER DISP (SSB) | 1500 Hz |
| 065 | OTHER SHIFT (SSB) | 1500 Hz |
| 066 | DATA LCUT FREQ | OFF |
| 068 | DATA HCUT FREQ | OFF |
| 070 | DATA IN SELECT | REAR |
| 071 | DATA PTT SELECT | RTS |
| 072 | DATA PORT SELECT | USB |
| 073 | DATA OUT KEVEK | 40 (ish) |
| 108 | SSB PTT SELECT | RTS (which is default, but check) |
-
F / M-LIST Button
Turn Off all Filters
| Menu Item | SET |
| NOTCH | OFF |
| CONT | OFF |
| DNR | OFF |
| DNF | OFF |
| WIDTH | 3000Hz |
| DT GAIN | Ajust as needed |
| AGC | FAST |
| IPO | IPO |
| MONI | On or Off your choice |
| NAR/WIDE | W 3K |
Video How To PART 1
Video How To PART 2
Yaesu FT-991A Data Mode Setup for WSJT-x and JS8CALL
How to configure your Yaesu FT-991A
Data Mode Setup for WSJT-x and JS8CALL
You first will want to install a PC Timing Syc software. Data messages sent over the air work best when stations are in sync and within 0.1 DT Sec of each other. THe link below is an excellent piece of software to help your digital applications stay in clock sync http://www.timesynctool.com/
-
MENU/SETUP Button selections and settings
| MENU NBR | MANU NAME | SETTING |
| 031 | CAT RATE | 9600 (match pc serial port rate) |
| 032 | CAT TOT | 100msec |
| 033 | CAT RTS | DISABLE |
| 062 | DATA MODE | OTHERS |
| 064 | OTHER DISP (SSB) | 1500 Hz |
| 065 | OTHER SHIFT (SSB) | 1500 Hz |
| 066 | DATA LCUT FREQ | OFF |
| 068 | DATA HCUT FREQ | OFF |
| 070 | DATA IN SELECT | REAR |
| 071 | DATA PTT SELECT | RTS |
| 072 | DATA PORT SELECT | USB |
| 073 | DATA OUT KEVEK | 40 (ish) |
| 108 | SSB PTT SELECT | RTS (which is default, but check) |
-
F / M-LIST Button
Turn Off all Filters
| Menu Item | SET |
| NOTCH | OFF |
| CONT | OFF |
| DNR | OFF |
| DNF | OFF |
| WIDTH | 3000Hz |
| DT GAIN | Ajust as needed |
| AGC | FAST |
| IPO | IPO |
| MONI | On or Off your choice |
| NAR/WIDE | W 3K |
Video How To PART 1
Video How To PART 2
